Plaster Of Paris (P.O.P)

Interior plaster is used for decorating and renovation works.

Water is poured into the clean gypsum basin. Alçıbay Adhesive Plaster sprinkled into the water in the basin. Continue until sufficient rate is achieved (10 kg gypsum / 7,0 l water
Waiting a couple of minutes for the gypsum absorbs water .Mixing the mortar until reach homogenous mixture. Use low speed mechanical mixer for the ideal mixture.
It is poured into greased molds. It is expected until setting time. Usage time (average) is 8-10 minutes
Condensing Alçıbay Plaster of Paris is removed from the plaster mold. the plaster is ready for use.

The molds must be completely dried before application.
All equipment used in the mixing process should be clean.
Molds must be lubricated with mold oil.
Hemp or fiber can be used to increase the strength of the plaster.
Water should not be added to the plaster during mixing of the mortar.
The plasterboard coming out of the mold is completely kept at room temperature until dry.
The floor must be roughened before installation.
Before installation, the floor should be moistened ıf ıt very dry.

Trade Name	FIBROUS GYPSUM PLASTER ELEMENTS
Place For Use	INTERIOR PLASTER IS USED FOR DECORATING AND RENOVATION WORKS.
Directive	REGULATION (EU) No 305/2011
STANDART	TS EN 13279-1
Types of gypsum	C1
Physical Form	White Powder
Content	CaSO4+1/2H2O (hemihydrate gips), retarder
Powder/ Water Ratio	100 gr Powder / 70 gr water
Water Absorption	%30-35
Setting Time	minimum 8 min
Flow diameter	150-200 mm
PH	7-8
Surface Hardness	min 4 N/mm² ( 2 hour ) min 10 N/mm² (7 day)
EĞILME MUKAVEMETİ	min. 1,5 N/mm^² ( 2 hour) min. 3 N/mm^² (7 day )
Fire Resistance	A1 (non flammable product)
SOUND INSULATION WITH DIRECT AIR	NPD (No Performance Decelerated )
Thermal Resistance	NPD (No Performance Decelerated )
Storage Condition The bags should be stacked in a dry environment with no airflow, with a maximum of 20 bags on top of the pellet.
Safety and Healthy Use gloves, glasses, gloves and a mask for your health and safety during the application. In case of leakage, wash eyes with plenty of water. If accidentally swallowed by the plaster, rinse your mouth.