Hand Plaster

This is a bagged gypsum based which could be directly applied on such materials as bricks, concrete, aerated concrete, etc

Water is poured into the clean gypsum basin. Alçıbay Hand Plaster sprinkled into the water in the basin. Continue until sufficient rate is achieved (10 kg gypsum / 60 l water ).
Waiting a couple of minutes for the gypsum absorbs water .Mixing the mortar until reach homogenous mixture. Use mechanical mixer for the ideal mixture.
The surface level is adjusted with ano.
The wall is thrown with a mortar trowel. Correct with a scoop. Mortar should be smoothed with a trowel before returning the water completely. Application thickness should be at least 0.5 cm.

Before starting the application, particularly and oil on surfaces should be cleaned.
Attention should be paid to the cleanness of equipment for application
Don’t add water or gypsum during mixing.
When Application surface is very smooth, It should be roughened.
Plaster files should be applied in very large cracks and spaces in the junctions of different materials. Spaces must be filled in before application
Adhesive Plaster is ready for usage don’ add something.
Mİn. Application thickness 0,5 cm
Max application thickness 1,5 cm

Trade Name	LIGHT MIXED PLASTER FOR BUILDING (SPRAYING)
Place For Use	CONCRETE, GASBETON, BRICK ETC. FIRST FLOOR PLASTER APPLIED WITH SURFACE MACHINE.
Directive	REGULATION (EU) No 305/2011
STANDART	TS EN 13279-1
Types of gypsum	B4 (Light Weight Hand Plaster )
Physical Form	White Powder
Content	CaSO4+1/2H2O (hemihydrate gips), Calcite, pearlite, retarder , water absorber, air entrainer
Dry Density	725 gr/lt
Powder/ Water Ratio	100 gr Powder / 60 gr water
Water Absorption	%25-35
Setting Time	Minimum 30 min.
PH	13-14
Surface Hardness	40 SHORE D
Consumption	1 cm thickness for 1 m² 8,5-10 kg
Flexural Resistance	min. 1 N/mm^²
compressive resistance	min. 2 N/mm^²
fracture resistance	min 0,1 N/mm^²
Fire Resistance	A1 (non flammable product)
SOUND INSULATION WITH DIRECT AIR	NPD (No Performance Decelerated )
Thermal Resistance	NPD (No Performance Decelerated ) (thermal conductivity coefficient max 0,35 W/mK)
Shelf Lifer	1 year . The ambient and surface temperature of the application must be at least 5 ° C
Storage Condition The bags should be stacked in a dry environment with no airflow, with a maximum of 20 bags on top of the pellet.
Safety and Healthy Use gloves, glasses, gloves and a mask for your health and safety during the application. In case of leakage, wash eyes with plenty of water. If accidentally swallowed by the plaster, rinse your mouth.