Adhesive Plaster - Ürünlerimiz

Water is poured into the clean gypsum basin. Alçıbay Adhesive Plaster sprinkled into the water in the basin. Continue until sufficient rate is achieved (10 kg gypsum / 50 l water ).
Waiting a couple of minutes for the gypsum absorbs water .Mixing the mortar until reach homogenous mixture. Use mechanical mixer for the ideal mixture.
The mortar is placed on the back of the plaster board
The plaster board pasting the wall.

Before starting the application, particularly and oil on surfaces should be cleaned.
Attention should be paid to the cleanness of equipment for application
Don’t add water or gypsum during mixing.
Adhesive Plaster is ready for usage don’ add something.
When Application surface is very smooth, It should be roughened.
Materials that will form a film layer on the application surface should not be applied

Trade Name	Adhesive Plaster for Gypsum Board
Place For Use	It is a gypsum used for gypsum board pasting on concrete, aerated concrete, brick surfaces. .
Physical form	White Powder
Content	CaSO4+1/2H2O (hemihydrate gips), Calcite, retarder , water absorber
Power/water ratio	100 GR gypsum / 50 GR water
Water absorption	%15-25
Setting Time	min. 30 min
Shelf Lifer	1 year . The ambient and surface temperature of the application must be at least 5 ° C
Storage Condition The bags should be stacked in a dry environment with no airflow, with a maximum of 20 bags on top of the pellet.
Safety and Healthy Use gloves, glasses, gloves and a mask for your health and safety during the application. In case of leakage, wash eyes with plenty of water. If accidentally swallowed by the plaster, rinse your mouth.